Shenzhen Lanborui Technology Co., Ltd.
Main products:LED Furniture
Contact Us
  • Contact Person : Ms. Xu Kay
  • Company Name : Shenzhen Lanborui Technology Co., Ltd.
  • Tel : 86-755-83303420
  • Fax : 86-755-83303420
  • Address : Guangdong,ShenZhen,30M,Jindiminxuan building,FuQiang Road,Shawei,Futian
  • Country/Region : China
  • Zip : 518000

2011 New RGB touch Remote LED Controller

2011 New RGB touch Remote LED Controller
Product Detailed
2011 New RGB touch Remote LED Controller 1.adjust color and light intensity 2.20-30M remote distance 3.elegent in design 2011 New RGB touch Remote LED ControllerItem no. :HS-RGB-Touch-Aspecification

Sheating material:Controller: aluminum             remote: ABS+PC
Working temp:-20°C~80°C
Radio frequency:433.92MHz
Telecontrol distance:Open space, 20~30M
Radio receive way:ASK
Receiver sensitivity-105dbm
Controll mode:PWM
Max STDBY current:10mA
Max load:5A (each circuit)
Static power consomption:30LED/M : ≤5.4W   
Static current30LED/M : 450mA    
Control way:3 ways, respectively corresponding R,G,B,three colors
Connection type:anode
Output current:5000mA( each circuit)
Lifetime of the controller40000H
Product size:Remote:114×56×22mm        Controller: 65×38×25mm
Packing: 7*7*12.5cm
Max no. of memory controller:6 pcs 

Using way

1.How to fit the telecontroller and controller:

First they need to study when leave the factory for the factory customers,there

is a study press-key on the control board, press the study-key in the condition of the energization, the white led will be out, at this time, press any buttons of the telecontroller, the white light will blinker three times, then the study is successful, the lamp will be controlled by the telecontroller.It need to study max 6 telecontroller for one function of the controller, it means that study 6 times, at this time, the controller can be controlled by the 6 telecontroller, it’s usd for the factory, study one is ok in the normal situation.

Here is how to clean out the address message inside of the controller, when don’t use the telecontroller to control the controller, it need to clean out the memory message inside of the controller. Press the study-key 3 seconds, the white light will blinker, meanwhile it clean out all of the memory message, the controller is empty, it can’t be controlled by any telecontroller, use it normally only re-study.

2.How to choose the matched voltage of the external power supply

When we determined the series quantity of the LED lights, we can dispose

the adapter voltage of the external power supply, for example, as per 3.3V to calculate for each Led, when need 6pcs Led in series,the voltage will be 19.8V, so we can use the 24V.

The input voltage must be more than need voltage, but not too more, the efficient is the most when it is the closest, for example, 3pcs Led need 12V, 8pcs need 30V.

3.How to match the current for controller and Led

Performance demand of Led is the current can’t be more than the rated value, it will damage the Led once more than the rated value, the current output controlled need to customize as per the customers need, the output current of the controller use PWM constant current to control, Max output current for each way is 1000mA, the customers can customize the current as per the own need, calculate the parallel quantity of Led, multiply the each string current value.

Pls feel free to contact us if you have any questions.

2011 New RGB touch Remote LED Controller

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.